The von Mises stress the part may carry, in MPa. The optimizer holds a smooth maximum of the stress over the part under it, which lies at or above the stress of every cell.
Von Mises stress the part may carry, in MPa.
Values the block gives besides its output. The editor lists them under Properties, and an input can read one by reference.
How far the Solid breaks the rule at each point, 0 where it is met; only there when a Solid is connected.
The steepest overhang allowed, measured against the build plate, in degrees.
The direction the part grows in, normal to the build plate.
The thinnest wall or smallest feature allowed.
The bound a Metric is held to (at most, at least, or equal).